LX225-HS
Technical Specifications
| Type | 3 FT-CCDs bonded to fiber-optic tapers |
|---|---|
| Sensor | Proprietary Rayonix frame-transfer CCD |
| Fiber-optic Taper Demagnification Ratio | 2.92:1 |
| Phosphor | Standard 40μm thick, custom options available |
| PSF (FWHM) Depends on Phosphor Option Chosen | 100µm with standard phosphor, 65µm with 25µm phosphor |
| Active Imaging Surface | 85 x 170mm 14450 mm2 |
| Sensor Operating Temperature | -80°C |
| Readout Electronics (# of Channels) | 48 |
| Readout Noise | High speed mode: 8e−/pixel Low noise mode: 4e−/pixel |
| Dead Time Between Images | 1 millisecond |
| Dark Current | 0.003e−/pixel/second, or 0.0004 photons/pixel/second (12keV) |
| DQE | 0.8 |
| Sensitivity (Gain) | 7e−/12keV photon |
| Full Well Capacity | 400ke−/pixel (at standard binning, 2 x 2) |
| Cooling | Closed-cycle refrigeration |
User-configurable Imaging Parameters
On-chip Binning
| 1 X 1 | |
|---|---|
| Readout Speed | 2.5 frames/second |
| Pixel Size | 44μm |
| Frame Size | 1920 x 5760 pixels |
| 2 X 2 | |
| Readout Speed | 10 frames/second |
| Pixel Size | 89μm |
| Frame Size | 960 x 2880 pixels |
| 3 X 3 | |
| Readout Speed | 20 frames/second |
| Pixel Size | 133μm |
| Frame Size | 640 x 1920 pixels |
| 4 X 4 | |
| Readout Speed | 40 frames/second |
| Pixel Size | 177μm |
| Frame Size | 480 x 1440 pixels |
| 5 X 5 | |
| Readout Speed | 55 frames/second |
| Pixel Size | 220μm |
| Frame Size | 384 x 1152 pixels |
| 6 X 6 | |
| Readout Speed | 75 frames/second |
| Pixel Size | 266μm |
| Frame Size | 320 x 960 pixels |
| 8 X 8 | |
| Readout Speed | 100 frames/second |
| Pixel Size | 354μm |
| Frame Size | 240 x 720 pixels |
| 10 X 10 | |
| Readout Speed | 140 frames/second |
| Pixel Size | 440μm |
| Frame Size | 192 x 576 pixels |
Physical Dimensions
| Detector Head | |
|---|---|
| Height x Width x Depth | 37cm x 30cm x 26cm |
| Approximate Weight | 30kg |
| Electronics / Cooling Assembly | |
| Height x Width x Depth | 175cm x 64cm x 64cm |
| Approximate Weight | 215kg |