SX30-HS
Technical Specifications
| Type | One FT-CCDs bonded to fiber-optic tapers |
|---|---|
| Sensor | Proprietary Rayonix frame-transfer CCD |
| Fiber-optic Taper Demagnification Ratio | 1:1 |
| Phosphor | Standard 40μm thick, custom options available |
| PSF (FWHM) Depends on Phosphor Option Chosen | 100µm with standard phosphor, high resolution custom option available |
| Active Imaging Surface | 30 x 30mm 900 mm2 |
| Sensor Operating Temperature | -80°C |
| Readout Electronics (# of Channels) | 16 |
| Readout Noise | High speed mode: 8e−/pixel Low noise mode: 4e−/pixel |
| Dead Time Between Images | 1 millisecond |
| Dark Current | 0.003e−/pixel/second, or 0.0004 photons/pixel/second (12keV) |
| DQE | 0.8 |
| Sensitivity (Gain) | 70e−/12keV photon |
| Full Well Capacity | 400ke−/pixel (at standard binning, 2 x 2) |
| Cooling | Closed-cycle refrigeration |
User-configurable Imaging Parameters
On-chip Binning
| 1 X 1 | |
|---|---|
| Readout Speed | 2.5 frames/second |
| Pixel Size | 16μm |
| Frame Size | 1920 x 1920 pixels |
| 2 X 2 | |
| Readout Speed | 10 frames/second |
| Pixel Size | 32μm |
| Frame Size | 960 x 960 pixels |
| 3 X 3 | |
| Readout Speed | 20 frames/second |
| Pixel Size | 48μm |
| Frame Size | 640 x 640 pixels |
| 4 X 4 | |
| Readout Speed | 40 frames/second |
| Pixel Size | 64μm |
| Frame Size | 480 x 480 pixels |
| 5 X 5 | |
| Readout Speed | 55 frames/second |
| Pixel Size | 80μm |
| Frame Size | 384 x 384 pixels |
| 6 X 6 | |
| Readout Speed | 75 frames/second |
| Pixel Size | 96μm |
| Frame Size | 320 x 320 pixels |
| 8 X 8 | |
| Readout Speed | 100 frames/second |
| Pixel Size | 128μm |
| Frame Size | 240 x 240 pixels |
| 10 X 10 | |
| Readout Speed | 140 frames/second |
| Pixel Size | 160μm |
| Frame Size | 192 x 192 pixels |